GM Inside News Forum banner

Control Arm Bushings

1105 Views 1 Reply 2 Participants Last post by  wawa
Hi all, I was just wondering if I were to get an wheel alignment on my 93 bravada, could I replace the control arm bushings after the alignment and not have to have it re-aligned? I know this might sound counter productive but I need new tires (and an alignment) now and won't have the time for a while to replace the uppers control arm bushings. Also what are the implications in replacing only the upper control arm bushing and not the lowers, cause as far as I can tell it's only the uppers thats are going bad (makes horrible noises). Thanks
1 - 1 of 2 Posts
do all the work before the alignment. worn bushings can skew the readings during the alignment and anyway most shops will not do the alignment before any components with play are repaired
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top