GM Inside News Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I have a cruse control problem. The CC was working and just stopped. I still get the light when the switch is pushed in but the CC will not engage. I took it to the dealer
here in Newnan Ga. and they charged me 80 bucks to tell me the C1 connector has no voltage. If that was truly the case then there would be a lot of things that would not be working. I don't think they checked anything. I was advised that for 6 hours of labor charge plus parts and they would TRY to fix it. I asked to speak with the tech and was told that he was busy with another job. I didn't get to talk with him. I sure would like to know what they checked so that maybe I could come up with a fix. Anybody out there have any luck fixing this problem with the cruse control?
 

·
Registered
Joined
·
9,571 Posts
my 07 AVALANCHE the brake switch went bad and cruise was intermittent (mostly not working) but my brake lights always worked
changed the brake switch and all is well
PS ABS/ATC codes I believe will prevent cruise from working
 
1 - 3 of 3 Posts
Top