GM Forum / GM News GM Forum / GM News
 
Go Back   GM Inside News Forum > Sponsor Zone > Site Sponsors and Vendors Area > Sun Automobile
Register Home Forum Active Topics eBay Marketplace Media Gallery Mark Forums Read

Please Visit our Site Sponsors

GM Inside News & GM Forum is the premier GM Forum and GM News Source on the internet. We discuss all GM models on the forum. Registered Users do not see the above ads. Please Register - It's Free!
Reply
 
LinkBack Thread Tools Display Modes
Old 06-05-2009, 03:41 PM   #1 (permalink)
Supporting Vendor
 
SunAutomobile's Avatar
 
Join Date: Mar 2009
Location: Santa Ana, CA
Posts: 10
How does it work??? Hyper Ground System



What is it?
Hyper Ground System is a new generation tuning system designed to provide a direct, low-resistance ground path from engine components to the battery. It allows the entire electrical system to perform at greater efficiency, which can result in:
- increased hp
- increased torque
- improved fuel efficiency
- stabilized idle
- brighter lights
- quicker engine starts
- reduced emissions
- reduced audio noise

How does it work?
In any electrical system, electric current flows from the positive terminal to the electrical components, and back to the battery through the negative terminal. However, the way that the factory (stock) grounds are set-up, the electrons must travel through the steel and/or aluminum components in the car to complete the circuit, which creates much electrical resistance (steel/aluminum are not the best materials for electrical conductivity). This resistance disturbs the flow of electricity to a degree that electrical components such as ECU, lights, spark plugs. etc, cannot perform at maximum efficiency. In order to get the highest performance out of any automobile, it is necessary to achieve an efficient flow of electricity with the least resistance along its electrical circuit. By providing a direct ground path using highly conductive 99.99% pure copper, this electrical resistance is reduced greatly (as much as 10 times!), resulting in an ultra-low resistance ground path. In short, Hyper Ground System affects the electrical system similar to how a high performance intake and exhaust system affects the mechanical system, by scavenging power which would otherwise be lost due to system inefficiencies.

What makes it so special?

Sun Auto produces the Hyper Ground System to an exacting level of utmost quality. The cables are made to our proprietary design, constructed using thick-gauge 99.99% copper, with 1,477 strands per cable. Since the electrons only travel on the outside of the strands, many strands are necessary to maximize the electron flow. The cables utilize multi-layered shielding, which is specially blended to provide minimum electron leakage as well as to withstand engine room temperatures and protect against discoloration. Terminals are available with gold-plating, for better electrical conductivity and protection against corrosion. The Hyper Ground System also uses a patented “daisy-chain” method to connect directly from the cylinder head and other points under the hood to the battery, to provide an ultra-low resistance ground path. The kit comes in 3 universal sizes to fit any type of vehicle, and is effective for use in anything from bone-stock to fully modified vehicles. Aside from the universal kits (5 cables in different lengths), Sun Auto offers a lineup of car-specific kits, which are tailor made to fit a specific vehicle.

What will fit my car?
Hyper Ground System will fit virtually any vehicle:
Universal S-Type: for most 4 cylinder and V6 vehicles
Universal M-type: for most inline 6, V8 and larger vehicles
Universal L-type: for most cars with front engine/rear battery configuration

Optional wires in varying lengths are also available to supplement the universal kits and/or for custom applications.

Are these products legal?

Hyper Ground System was designed for use as OEM optional equipment. Generally speaking, any product that is authorized for use as original equipment by a car manufacturer is done so under the agreement that the parts are legal for use on public roads. Installing Hyper Ground System on your vehicle is not necessarily a modification to your vehicle, but rather an addition that supplements an existing system for increased efficiency. Hyper Ground System is not a replacement for your existing factory ground system; it is designed to be used in conjunction with your factory grounds to enhance electrical system efficiency through a direct, low-resistance ground connection. In any case, it is always best to check with your local laws and regulations to verify legality of any products you purchase for your vehicle.
__________________

New Generation Tuning System

3605 W. MacArthur Blvd, Suite 705
Santa Ana, CA 92704
PH: 714-708-7733
FX: 714-708-7722
http://www.sunautomobile.com
SunAutomobile is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

  GM Inside News Forum > Sponsor Zone > Site Sponsors and Vendors Area > Sun Automobile



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT -5. The time now is 06:12 AM.

Powered by vBulletin® Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.1.0
©2008 GMInsidenews.com.
GMInsideNews.com is not affiliated with GM, General Motors or any GM Divisions in any capacity.
GMInsideNews.com is an enthusiasts' forum dedicated entirely to news about GM vehicles.